Quartz brick is a type of quartz stone formed by processing quartz stone through certain techniques. The main component of quartz stone is silicon dioxide, which needs to be crushed, purified, and pressed with additives such as resin. This process results in the formation of quartz brick, which is made of recyclable materials and does not require mining or heating for solidification, with better bearing capacity. The main raw materials for quartz bricks are by-products of industrial production, such as fly ash, slag, cement mortar, and fillers. Quartz bricks are a delicate display of the natural stone texture, creating a true natural appearance and texture. They have the advantages of anti wrinkle, anti abrasion, round heat, corrosion, anti shooting, anti music performance, high resistance strength, rich and beautiful colors, fashion, classic, unique, energy-saving, and environmental protection. It can replace other expensive materials and is a suitable choice for high quality and low cost.
Quartz bricks, whether natural or not, will not fade when touched by hand. The stone pattern is clear, natural, and authentic. Mold technology is one of the core technologies of quartz bricks. Just like products such as silicone, mold rubber, latex, etc., the products produced do not have clear stone patterns and obvious defects.
Is the stone twisted or deformed. The twisted quartz bricks seem to be pathological, mainly due to the manufacturer's mold malfunctioning and deforming. Scrape the surface of quartz bricks with nails or metal. The more ash content there is, the lower the hardness of the product and the shorter its service life According to weight, the weight should not be too heavy.
The surface of the product does not generalize after being pasted on the wall. The main purpose in the early stage was to understand what cement it used, which should be low alkali Portland cement. If acid salt cement is used, it needs to be softened. If the surface is coated with alkali resistant quartz bricks after installation, it will become unnatural.
After the construction of quartz bricks, according to the local weather conditions, about 30 hours after the paving is completed, after the brick joints have solidified to a certain degree, rinse the brick surface with clean water. If some parts are not cleaned properly, you can use hydrochloric acid solution to clean them thoroughly, rinse them with clean water in a timely manner, and beautiful quartz bricks will appear in front of you. After laying the quartz bricks, water them 3-4 times at room temperature within 48 hours. During maintenance, do not enter the strength to avoid affecting the construction quality of the quartz bricks.
Editor: ZiYu
